かみこみ検査機

SXS2154HC1D/SXS3474HC1D

main_sx2154hcid

Overview of the X-ray seal inspection system

All of “jam”, “foreign objects”, “relative mass”, and “shape” can be inspected with high sensitivity!

Hybrid inspection of X-ray and optical system

By compositing two images shot with the X-ray and the optical system, all of “jam”, “foreign objects”, “relative mass”, and “shape” can be inspected with high sensitivity which was not possible with the conventional systems.
img01

Problems are solved in various inspections.

img_sxs2154_05

packaging bag with pattern or aluminum packaging material with high sensitivity.
sxs2154c1d-sxs3474hc1d-img02

Everyone can set an inspection range easily.

Everyone can easily set an inspection range that was difficult to set by following the system displays.

sx2154_img06

Clean images and high sensitivity

sxs2154_img03_1

Specifications

Model SXS2154HC1D SXS3474HC1D
Dimension of inspection product *1 W210mmH50mm (or 25mm for no curtain type) W340mmH120mm (or 40mm for no curtain type)
Transport weight 1kg *2
Transport belt speed 20 〜 60m/min *3
Belt width 240mm 350mm
Detection sensitivity φ0.3mm iron or stainless ball, stone, glass, hard bone, and high density plastic pieces, etc. *4
Display unit 12.1-inch wide TFT color LCD (with touch panel)
Structure Main unit/Base: All-stainless (SUS304)
Waterproof structure with the main unit conforming to IP63
Pass line 750±50mm
Max. X-ray output Tube voltage (Max.): 50kV, Tube current: 5.0mA
However, the electric power is limited to 150W.
Tube voltage (Max.): 50kV, Tube current: 8.0mA
However, the electric power is limited to 300W.
Operating environment Temperature: 0 to 35℃, Humidity: 30 to 85%, No dew condensation allowed. (It is necessary to clean the filter periodically.)
Weight 150kg 190kg
Power supply *5 AC100V±10% / AC200V±10% 1.0kVA 50/60Hz AC100V±10% / AC200V±10% 1.5kVA 50/60Hz

*1 For details, see the drawing of the possible inspection range.
*2 For other weight, contact System Square.
*3 For other transport speed models, contact System Square.
*4 The detection capacity may vary depending on the type of inspection product and the operating environment.
*5 Power consumption is different when cooling unit is equipped.
* The detection sensitivity to be used actually may vary depending on the physical properties (contents and shape, etc.) of inspection product and/or the operating environment.
* The cover to prevent the X-ray leak may be needed at the inlet and outlet according to the length of inspection product.
* Appropriate options may be separately needed in the following cases: Large temperature deviation in the installation location, high humidity, too cold or too hot object to be inspected.

SXS2154HC1D(Trapezoid)appearance figure

SXS2154HC1D

SXS3474HC1D(Trapezoid)appearance figure

SXS3474HC1D