Meta Hawk III series

SD3-80 Type

SD3-80 Type

specifications

D (non-waterproof) / W (waterproof)

Model SD3-8013D/W SD3-8016D/W SD3-8019D/W SD3-8025D/W SD3-8030D/W
Maximum passage width 800mm
Maximum passage height 130mm 160mm 190mm 250mm 300mm
Detection
sensitivity
Fe φ0.8mm φ0.9mm φ1.0mm φ1.2mm φ1.5mm
SUS304 φ1.5mm φ1.5mm φ1.5mm φ2.0mm φ2.4mm
Belt speed 24m/min (50Hz)
Conveyor size 1500mm (length)×700mm (belt width)
Upon detection of metal Belt stopped, buzzer warning, or automatic sorting (option)
Transport weight 20kg(Less than 30kg is possible in the case of 200V)
Power requirements AC100V±10%、AC200V±10%、50/60Hz、300VA or Three-phase AC200V±10%、50/60Hz、
Mass(kg) 223 226 229 237 245

The values for detection sensitivity represent the values when only a test piece is fed over the belt surface.
Values may vary depending on the product being handled and operating environment.

appearance figure