 |
  - Capable of accurately detecting magnetized needles used for baby pigs which cannot be detected by conventional systems. - The belt can be easily detached for easy cleaning. - There is no floppy detection caused by residual blood. - High and stable sensitivity for detection of needles in any directions. - The reciprocating inspection mode allows a single operator to perform the inspection. - The coil and conveyor are made of stainless steel and they are waterproof. |
| Model | SD4505VW | SD6517VW | SD9617VW | SD11825VW | |||
| Maximum passage width | 325mm | 510mm | 770mm | 970mm | |||
| Maximum passage height | 50mm | 170mm | 250mm | ||||
| Detection sensitivity | Fe | φ0.6mm | φ1.2mm | φ1.8mm | φ2.0mm | ||
| Belt speed | 25／31m/min（50／60Hz） | ||||||
| Conveyor size | belt width | 220mm | 350mm | 500mm | 700mm | ||
| length | 1.600mm | 2.000mm | 2.600mm | 2.800mm | |||
| Upon detection of metal | Belt stopped, buzzer warning (option), or automatic sorting (option) | ||||||
| Load capacity | 20kg | 20kg | 30kg | 30kg | |||
| Power requirements | AC100V±10％、50／60Hz、300VA | ||||||
| Coil type | Concentric loop coil | Opposed loop coil | |||||
* The values for detection sensitivity represent the values when only a test piece is fed over the belt surface.
Values may vary depending on the product being handled and operating environment.
Values may vary depending on the product being handled and operating environment.
 |
| L1 | L2 | a | b | c | d | e | f | g | |
| SD6517VW | 510 | 350 | 550 | 410 | 545 | 2000 | 170 | 1170 | 1690 |
| SD9617VW | 770 | 500 | 700 | 550 | 690 | 2600 | 170 | 1170 | 2150 |
| SD11825VW | 970 | 700 | 900 | 650 | 790 | 2800 | 250 | 1250 | 2350 |
(unit : mm)
* SD4505VW is for bar-shaped metals.